Page 3
2.0 Safety Label Defi nitions and Information
The Class 1000 meter may contain one or more of the following labels.
Operator(s) should familiarize themselves with the meaning of each label to
minimize risk.
The presence of this label is a cautionary indicator identifying a danger
risk. The manual should be consulted prior to proceeding.
The presence of this label indicates an electrical shock hazard exists in
the location or area where the label is placed. Prior to proceeding, the
MAINS power must be disconnected and the manual consulted for
safety information.
3.0 Precautionary/Safety Information
CAUTION: Internal circuit card components are extremely sensitive to
electrostatic discharge. Be careful not to touch internal circuitry
prior to discharging any static buildup on your person.
To discharge yourself, touch a grounded metal object such as
conduit or an earth-grounded metal enclosure.
WARNING: High voltages present on main PCB terminal block
TB1. Risk of serious injury and/or electrical shock exists. Prior to
performing any wiring operations, review all contents of the user
manual and de-energize the MAINS power switch. Only qualifi ed
personnel should perform installation wiring. Installation wiring
must comply with all local and national electrical codes.
WARNING: Failure to ground the enclosure creates a possible
shock hazard. Do not operate the Class 1000 meter without a
protective earth wire attached securely to the PE terminal screw.
After installing protective earth wiring, secure the screw tightly
(10 N-m torque.)
WARNING: NEVER open front panel of unit while unit has MAINS
power applied. Failure to comply can increase the risk of serious
injury and/or electrical shock.
To Next Page
Loading...
