E-Vision BCM300 - Installation of Varifocal or Motorized DOME Cameras (3 and 5 Mpx Models)

090000964 - Telecamere IP e-Vision serie SMART - Quick Guide
19
•STEP 3
The cables passage through the base preset hole must be protected (A): use a gasket and a coupling of adequate dimension
and connect them as illustrated in the images below (B).
When installation is finished, please reassemble the camera accurately.
5.2.2 Installation of varifocal or motorized DOME cameras
•STEP 1
A : Drill holes according to the drilling template supplied with the camera.
B : Remove the camera transparent dome: unscrew fixing screws with the provided hex key.
AB
AB