EX4 Operation Manual
--- 1 ---
Product Overview
Introduction
The EX4 aircraft is equipped with a vision positioning and GPS positioning system, which allows it
to fly and hover stably indoors and outdoors, and has fucntions such as one key RTH, orbit mode,
Track, and waypoint flight, etc. The EX4 is equipped with a 3-axis mechanical stabilization gimbal
to capturehigh-resolution pictures and videos. It can adjust the camera angle during flight to
capture unique photos and videos from different angles for better aerial photography experience.
The DF806 can be used with remote controller and APP to realize various operations and settings
of the aircraft and camera. The App on the phone can display real time high-definition FPV
(First-person view) and information like flight parameters at the same time.
Its maximum flight speed is 30km/h,flight time approach to 25 minutes.
Preparing the Aircraft.
Unfold the Aircraft
The Aircraft is folded inside the package. Follow the steps below to unfold the aircraft.
1. Step 1: Expand the arm outward (Pic. 1);
2. Step 2: Unfold the landing gear (Pic. 2);
3. Step 3: Separate the propeller blades (Pic. 3);
4. Step 4: Unfold the other arms and repeate step 2~3 with each arm (Pic. 4).
Battery Installation
1. Step 1: Slide the battery into the front of the battery compartment (Pic. 5);
2. Step 2: Then press the back of the battery down (Pic. 6);
3. Step 3: make sure that the latch on the battery is locked and the battery is in place. (Pic.7).
Warning: If the battery is not installed properly, the aircraft may crash due to power-cut during flight.
ć
To Next Page
Loading...
Need help?
General
