www.eaeelectric.com
www.eaeelectric.com
KXMANUAL
8
Installation
Points to be taken into consideration before installation
8- Protect the busbar against water and
moisture from unnished roofs and walls
during installation.
9- Tools required for the installation,
Micrometer type adjustable/calibrated torque
spanner
½ inch square drive size 10mm, 13mm and
19mm socket
Drilling Machine
Size 10mm Spanner/Socket
Screwdriver
Hoist with cloth sling
10- The busbar to be installed needs to be
hanged min 4 points, as shown in below
picture.
Min. From 4 points
10
To Next Page
Loading...