EAE ORIA - On;Off

!
Product Manual Oria Thermostat
EAE KNX Oria Thermostat Oria Thermostat PM R1.0
©EAE!Technology!! ! ! ! www.eaetechnology.com!! ! ! Sayfa!40!/!50!
!
!
4.4.5.2.2' Communication'Objects'
No
Object Name
Function
Data Type
Flags
61
Cool Control Value
Send
1 bit
DPT 1.002
CT
Cooling actuator will be controlled through this communication object.
Table 42
4.4.5.3,On/Off,
Figure 21
Cooling control parameters for on/off controller type should be configured here.
4.4.5.3.1' Parameters'
Parameter
Setting
Description
Cyclic Interval
1… 5 …255
Time period to send cooling
control value over “Cool Control
Value” communication object.
Inverse Output
Enable / Disable
Invert the output of the controller.
For example if normal output is
“On”, then inverted output is
“Off”.
Hysteresis (1/10 K)
1… 30 …255
Hysteresis value (Chapter 4.4.3.3)
Table 43
4.4.5.3.2' Communication'Objects'
No
Object Name
Function
Data Type
Flags
61
Cool Control Value
Send
1 bit
DPT 1.002
CT
Cooling actuator will be controlled through this communication object.
Table 44