EAE ORIA - Setpoint and Mode Management

!
Product Manual Oria Thermostat
EAE KNX Oria Thermostat Oria Thermostat PM R1.0
©EAE!Technology!! ! ! ! www.eaetechnology.com!! ! ! Sayfa!45!/!50!
!
!
4.5, Setpoints,
Setpoints, setpoint limitations, fan speeds and reset on site operations controlled through this parameter tab.
Figure 25
Current setpoint value can be transmitted over “Current Setpoint” communication object periodically or
periodically and when a change occurs. When selected as “Cyclic and Change” minimum difference is defined in
“Minimum Difference” parameter at “Temperature Sensor” tab.
!
!
!