Eagle Tree Systems Vector User Manual

USER GUIDE
24
The chart below shows typical receiver and servo/ESC connections for these airframe types.
* The Receiver Output and Vector Rx Harness sections do not apply to SPPM or S.BUS™ receiver modes.
Airframe
Vector
Airframe Type
Receiver Output*
Vector Rx
Harness*
Vector Output
Servo/ESC
Connection at
Model
Traditional Fixed
Traditional
Fixed
Rudder
Rud
Rudder/M1
Rudder Servo
Aileron
Ail
Aileron/M2
Aileron Servo
Elevator
Elv
Elevator/M3
Elevator Servo
Throttle
Thr
Throttle/M4
Motor ESC or Throt
Servo
2/3 position
Mode Switch
Mod
N/A
N/A
Gain Knob or
Submode switch
Aux
N/A
N/A
Fixed Wing with 2
nd
Aileron, Flaperon,
Elevator, or Rudder
(with Tx Mixing)
Traditional
Fixed
Rudder
Rud
Rudder/M1
Rudder Servo
Aileron
Ail
Aileron/M2
Aileron Servo
Elevator
Elv
Elevator/M3
Elevator Servo
Throttle
Thr
Throttle/M4
Motor ESC or Throt
Servo
2
nd
Aileron,
Elevator, Rudder
or Flaperon
Aux
Aux1/M5 (or
N/A)
2
nd
Aileron,
Elevator, Rudder or
Flaperon
2/3 position
Mode Switch
Mod
N/A
N/A
Elevon or V-Tail
without Ailerons
Elevon
Rudder (if used)
Rud
Rudder/M1
Rudder Servo
Aileron
Ail
Aileron/M2
Elevon Servo 1
Elevator
Elv
Elevator/M3
Elevon Servo 2
Throttle
Thr
Throttle/M4
ESC or Throttle
Servo
2/3 position
Mode Switch
Mod
N/A
N/A
Gain Knob or
Submode switch
Aux
N/A
N/A
V-Tail with Ailerons
V-Tail
Rudder
Rud
Rudder/M1
V-Tail Servo 2
Aileron
Ail
Aileron/M2
Aileron Servo
Elevator
Elv
Elevator/M3
V-Tail Servo 1
Throttle
Thr
Throttle/M4
Motor ESC or Throt
Servo

Eagle Tree Systems Vector Specifications

General

Brand	Eagle Tree Systems
Model	Vector
Category	Controller
Language	English