Eagle Tree Systems Vector - Packing List Contents; Technical Specifications

USER GUIDE
8
2.2 Packing List
Your package should include the following:
 Vector Controller
 Current Sensor/PSU (Deans
TM
, XT60
TM
or wire leads version),
 GPS/Magnetometer (GPS/Mag), with GPS stand, clip and screw
 Video, Audio (not shown), GPS, and Receiver Harnesses
2.3 Specifications
 Supported Airframes:
o Traditional fixed wing, Elevon, and V-tail planes
o Tricopter, Quadcopter, and Hexacopter multirotors
 Recommended Airframes: the Vector is not recommended for large or heavy airframes, due to no or
limited testing on these types of models at this time. Examples: giant scale fixed wing models, gas or
nitro models, turbines, or multirotors larger than 650mm are not recommended.
 Video formats: composite NTSC and PAL (autodetect)
 Servo/ESC Output framerate:
o Fixed wing: adjustable up to 400Hz
o Multirotor (including tricopter yaw servo): 400Hz
 Dimensions (L x W x H, approximate):
o Controller: 65mm x 33mm x 14mm
o GPS/Mag: 35mm x 24mm x 15mm
o Current Sensor/PSU (with Deans™): 42mm x 19mm x 18mm
 Mass (approximate):
o Controller: 21g
o GPS/Mag: 13g
o Current Sensor/PSU (with Deans™): 15g
 Current Sensor/PSU
o Peak measured current: 140 amps (see section 3.4)
o Max pack voltage: 6s/25.2V
o Maximum 12V PSU current: 1A
o Maximum 5V PSU current: 1A