Need help?Do you have a question about the East EA620 and is the answer not in the manual?
Procedures for starting the UPS, both with and without utility power.
Procedures for shutting down the UPS in various operational modes.
Key technical parameters like output frequency, waveform, power, and efficiency.
Details on DC input voltage ranges and AC input voltage tolerances for bypass and utility modes.
Information on battery capacity, charging modes, and charging current settings.
Monthly checks to ensure UPS reliability and long-term service.
Methods for self-checking and resolving abnormal UPS conditions like power connection issues.
Counters for specific faults such as inability to start, continuous beeping, or no power on.
General| Output Waveform | Simulated Sine Wave |
|---|---|
| Input Voltage | 230VAC |
| Output Frequency | 50/60Hz |
| Typical Recharge Time | 8 hours to 90% capacity |
| Protection | Overload, overcharge, deep discharge |
| Outlets | 4 x IEC outlets |
| Communication Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Humidity | 5% to 95% non-condensing |
To Next Page
