EASTMAN PACEMAKER - Page 38

38
EASTMAN
Stationary Catcher
Back Frame
ITEM PART NO. DESCRIPTION QTY.
16 PM-74 Locknut 1
17 PC-12 Plate, Catcher Back
Stationary 1
18 211-99 Nut, Elastic Hex 10-24 2
19 342-36-4 Scr. Set Sokt. Hd.
5/16-18 x 1/4 1
20 205-34 Nut, Heavy Hex 1/4-20 1
21 402-34 Washer, Lock 1/4 1
22 332-102-8 Scr. Cap Flthd. Sokt.
10-32 x 1/2 3
23 331-38-36 Scr. Cap Hex Hd.
3/8-16 x 2-1/4 1
24 410-38 Washer, Flat 3/8 4
25 402-38 Washer, Lock 3/8 1
26 205-38 Nut, Heavy Hex 3/8-16 1
27 355-34-24 Scr. Shoulder Sokt. Cap.
1/4 x 11/2 1
28 205-36 Nut, Heavy Hex 5/16-18 2
29 402-36 Washer, Lock 5/16 1
ITEM PART NO. DESCRIPTION QTY.
1 9060-006 Collar 1
2 PM-0202 Paralleling Bracket, Rear 1
3 M-70 Washer, .250 x .375
x .0312 Steel 2
4 PM-102 Bar, Paralleling, Stat.
Catcher 1
5 PM-137 Stud, Pivot 1
6 PC-10B Frame, Back 1
7 F-272A Washer Steel .125 Thk. 1
8 PS-25R Cam, Catcher 14" 1
9 PM-109 Cam, Follower 1
10 CHTC-15R Arm, Right, Stationary
Catcher 1
11 PM-0210 Stud, Assembly, Catcher
Short 1
12 F-77 Stud, Catcher Plate Pivot 2
13 PS-27 Bracket, Catcher Bar 1
14 PM-124 Spacer, Stat. Catcher
Bracket 1
15 PM-68A Screw, Stop 1
From the library of: Diamond Needle Corp