Eastron SDM320C - Measurement Accuracy; RS485 Communication; Performance Standard

4
2018 EASTRON Electronic. All Rights Reserved. www.eastrongroup.com
SDM320C User Manual V1.2
2.2 Measurement Accuracy
 Voltage: 0.5%
 Current: 0.5%
 Frequency: 0.1%
 Power Factor: 0.01
 Active Power: 0.5%
 Reactive Power: 1%
 Apparent power: 0.5%
 Active Energy: Class 0.5s
 Reactive Energy: Class 2
2.3 RS485 Communication
 Bus Type: RS485
 Protocol: Modbus RTU
 Baud Rate: 1200/2400/4800/9600bps (Default)
 Address Range: 1-247 (Default:1)
 Max. Bus loading: 64pcs
 Max. Bus loading: 1000m
 Parity: EVEN /ODD/NONE (Default)
 Data Bit: 8
 Stop Bit: 1
2.4 performance standard
 Operating Humidity: ≤90%
 Storage Humidity: ≤95%
 Operating Temperature: -25℃~+55℃
 Storage Temperature: -40℃~+70℃
 International Standard: GB-T 17215/ IEC62053-22
 Accuracy Class: Class 0.5S
 Installation Category: CAT II
 Protection against Penetration of Dust and Water: IP51 (Indoor)
 Insulating Encased Meter of Protective Class: II
 Altitude: ≤2000m