Eastron SDM630-Modbus MID V2 - Page 14

13
B+G e-tech GmbH Fr.-Mehring St. 36 DE 01979 Lauchhammer
Fax: 0049 3574 4675519 Web: www.eastron-germany.de
2
Press to enter the selection
routine. The current setting will flash.
Note: When it’s dFt,
it means 2.5Wh/VArh
Use and buttons to choose pulse rate. On completion of the entry procedure,
press to confirm the setting and press to return to the main set up menu.
Pulse Duration
The energy monitored can be active or reactive and the pulse width can be selected as
200, 100(default) or 60ms.
(It shows pulse width of 200ms)
1-1
From the Set-up menu, use and
buttons to select the Pulse width
option.
1-2
Press to enter the selection
routine. The current setting will flash.