B+G e-tech and EASTRON SDM630MCT V2 User Manual
B+G e-tech GmbH www.stromzähler.eu info@bg-etech.de
Pulse output
This provides two pulse outputs that clock up measured active and reactive energy. The constant
for active energy is 3200imp/kWh (Terminals 11&12). The pulse width for pulse 1 (Terminals
9&10) can be set from the set-up menu.
Start Up Screens
The first screen lights up all display
segments and can be used as a display
check.
The second screen indicates the
firmware installed in the unit and its
build number.
The interface performs a self-test and
indicates
the result if the test passes.
*After a short delay, the screen will display active energy measurements.
To Next Page
Loading...
