Eaton 8 kW Air-cooled User Manual

28
Section 4 — Maintenance
Air-cooled Generators
4.12 SERVICE SCHEDULE
ATTENTION: It is recommended that all service work
be performed by the nearest Dealer.
SYSTEM/COMPONENT PROCEDURE FREQUENCY
X = Action
R = R eplace as N ecessary
* = N otify D ealer if R epair is
N eeded.
Inspect Ch ange Clean
W = W eekly
M = Monthly
Y = Yearly
FUEL
Fuel lines and connections*
X M
LUBRICATION
O il level
X M or 24 hours of
c ontinuous operation.
O il
X 2Y or 200 hours
of operation.**
O il filter
X 2Y or 200 hours
of operation.**
COOLING
Enclosure louvers
X X W
BATTERY
R e m ove corrosion, ensure
dryness
X X M
Clean and tighten battery
ter m inals
X X M
Check charge state
X R EVE R Y 6 M
Electrolyte level
X R EVE R Y 6 M
ENGINE AND MOUNTING
Air cleaner
X R 2Y or 200 hours
S park plug ( s )
X R 2Y or 200 hours
GENERAL CONDITION
Vibration, N oise, L eakage, Te m perature*
X M
COMPLETE TUNE-UP* T O BE C O MP L ETE D BY A D EA L E R 2Y or 200 hours
* Contact the nearest dealer for assistance if necessary.
** Change oil and filter after first eight (8) hours of operation and then every 200 hours thereafter, or 2 years, whichever occurs first. Change
sooner when operating under a heavy load or in a dusty or dirty environment or in high ambient temperatures.

Eaton 8 kW Air-cooled Specifications

General

Brand	Eaton
Model	8 kW Air-cooled
Category	Inverter
Language	English