5. If the leveling feet are not fully
retracted, turn them until they
are retracted.
6. Open the UPS front door.
7. Remove the bolts that fasten
the shipping brackets to the
UPS cabinet and to the pallet.
8. Remove the shipping brackets.
Note: After you have removed the shipping brackets, move the unit
immediately away from the pallet.
Eaton 93PS UPS 8–40 kW User's and installation guide
©
Eaton Corporation plc 2016. All rights reserved. Revision: 003 Document ID: P-164000493 47 (104)
To Next Page
Loading...
