Eaton 93PS-8(20)-20(-C) - Turning the UPS from the Maintenance Bypass Mode to; The Double Conversion Mode

Figure 34. Maintenance bypass mode
A Static bypass input 1 Maintenance Bypass Switch (MBS)
B Rectifier input
C Out
7.8 Turning the UPS from the maintenance bypass mode
to the double conversion mode
To turn the UPS back to the double conversion mode:
1. Follow the normal start position:
Figure 35. Maintenance bypass mode
A Static bypass input 1 Maintenance Bypass Switch (MBS)
B Rectifier input
C Out
2. Turn on the rectifier switch to connect rectifier input to the UPS.
Eaton 93PS UPS 8–40 kW
User's and installation guide
©
Eaton Corporation plc 2016. All rights reserved. Revision: 003 Document ID: P-164000493 90 (104)