Eaton 93PS-8(20)-20(-C) - MiniSlot Cards

Figure 22. Communication interfaces in the 93PS UPS 20 kW standard and C-model
frames
Figure 23. Communication interfaces in the 93PS UPS 40 kW frame
1
TB11, not used 9 MiniSlot 1
2 TB10, not used 10 TB1, signal input 1–5
3 TB9, not used 11 TB2, not used
4 TB8, external CAN termination 12 TB3, not used
5 TB7, external CAN 13 Serial COM port RS-232
6 TB6, pull chain bus 14 MiniSlot 2
7 USB1, USB host (connection to
accessories)
15 TB4, EPO
8 USB2, USB device (connection to
computer)
16 TB5, relay output
6.1 MiniSlot cards
The Eaton 93PS UPS has 2 MiniSlot communication bays. To install a MiniSlot
card, follow the instructions in Section 5.5.5 .
The UPS is compatible with the following MiniSlot cards:
• Network Card-MS
Eaton 93PS UPS 8–40 kW
User's and installation guide
©
Eaton Corporation plc 2016. All rights reserved. Revision: 003 Document ID: P-164000493 66 (104)