Eaton 93PS-8(20)-20(-C) - Page 62

Figure 19. Simplified CAN and Pull-Chain wiring for parallel UPS system
A UPS 1 1 CAN
B UPS 2 2 Pull chain
C UPS 3 (if installed)
D UPS 4 (if installed)
Note: This drawing is for distributed bypass wiring purposes and it is not a
floor layout plan. UPSs can be placed in any physical order.
Eaton 93PS UPS 8–40 kW User's and installation guide
©
Eaton Corporation plc 2016. All rights reserved. Revision: 003 Document ID: P-164000493 62 (104)