Figure 27. Sign in window with the password field
3.
Enter the password 0101 and press .
4. Select Continue.
5. Select Configuration and then Relays Outputs.
Figure 28. Selecting Relay Outputs in the Configurations screen
6. Select out of the following options:
• Native (Alarm) relay
It is possible to set 8 different events for the native relay. If any of the
set events occurs, the relay is activated
• MiniSlot 1
• MiniSlot 2
Eaton 93PS UPS 8–40 kW
User's and installation guide
©
Eaton Corporation plc 2016. All rights reserved. Revision: 003 Document ID: P-164000493 70 (104)
To Next Page
Loading...
