8 Eaton 9PX Lithium-Ion User Guide P-164001006—Rev 02
Table 5. Display Functions (Continued)
Main menu Submenu Display information or Menu function
In/out settings
Sets Input and Output parameters
On/Off settings Sets On/Off conditions
Battery settings Sets battery configuration
Com settings Sets communication parameters
Event Log Event filter Selects faults, alarms and/or events to
display
Event list Displays the events stored
Reset fault list Clears events
Fault log Fault list Displays the faults stored
Reset fault list Clears faults
Identification
[Product type/model] / [Part/Serial
number] / [UPS/NMC firmware] / [Com
card IPv4], [Com card IPv6], [Com card
MAC]
Registration Links to Eaton registration website
22..77 UUsseerr SSeettttiinnggss
The following table displays the options that can be changed by the user.
Table 6. User Settings
Submenu Available Settings Default Settings
Local Settings
Language
[English] [Français] [Deutsch] [Español] [Русский]
[Português] [Italiano] [Simplified Chinese]
[Japanese] Menus, status, notices and alarms,
UPS fault, Event Log data and settings are in all
supported languages.
[English] User
selectable when UPS is
powered for the first
time.
Date/ time
Format: [International] [US] [INTL]
LCD Modify LCD screen brightness and contrast to be
adapted to room light conditions.
Audible alarm
Mode: [Enabled] [Disabled on battery] [Always
disabled] Enable or disable the buzzer if an alarm
occurs. Level: [High] [Low]
[Enabled] [High]
Protected access
[Enabled] [Disabled] Password is: 0577 [Disabled]
In/Out settings
Output voltage [200V] [208V] [220V] [230V] [240V] [230V]
Output frequency Mode: [Normal] [Converter] [Marine] Frequency
can be changed in Frequency [Converter] mode In
[Marine] mode output frequency follows input
frequency
[Normal]
User Settings
To Next Page
Loading...
