Need help?Do you have a question about the Eaton 9PX6K-L and is the answer not in the manual?
General| Input Voltage | 200/208/220/230/240 VAC |
|---|---|
| Output Voltage | 200/208/220/230/240 VAC |
| Output Power Factor | 1.0 |
| Topology | Double Conversion Online |
| Output Voltage THD | < 2% |
| Frequency | 50/60 Hz |
| Input Frequency | 40-70 Hz |
| Batteries | Internal |
| Form Factor | Rack/Tower |
| Power Rating | 6000 VA |
| Output Power Capacity | 6000 W |
| Efficiency | Up to 94% |
| Input Voltage Range | 160-276 VAC |
| Battery Type | Sealed Lead-Acid (SLA) |
| Typical Recharge Time | 3-4 hours |
| Communication | USB, RS-232 |
| Network Management | Optional Network Card |
| Weight | 56 kg |
Examples of symbols used on the product to alert users to important information.
Instructions and warnings for connecting and operating the UPS unit safely.
General overview and welcome to the Eaton 9PX UPS user guide.
Eaton's environmental policy, product development, and recycling information.
Key advantages and features of the Eaton 9PX uninterruptible power system.
Information and diagrams related to UPS dimensions for installation.
Lists and describes various optional accessories available for the UPS.
Detailed diagram and labels for the rear panel connections of the 9PX6K-L model.
Description of the UPS's five-button graphical LCD and its functions.
Explains the meaning of indicators and status information displayed on the UPS LCD.
Details on navigating the UPS menu and understanding display options.
Overview of configurable settings that users can adjust on the UPS.
Procedures for checking the UPS for shipping damage and filing claims.
Instructions on how to safely unpack the UPS cabinet.
Verifies that all included accessories are present with the UPS.
Steps and guidelines for installing the UPS in a tower configuration.
Recommendations and steps for installing the UPS in a rackmount configuration.
Details on upstream protection and cable cross-sections for installation.
Instructions for connecting Extended Battery Modules (EBMs) to the UPS.
Steps for accessing terminal blocks and connecting power cables.
Guidance on how the UPS detects connected accessories.
Information on the available communication ports on the UPS.
Details on Remote ON/Off and Remote Power Off (RPO) features.
Overview of optional cards for enhanced communication capabilities.
Information about the Eaton Intelligent Power Software suite for UPS management.
Procedures for starting the UPS and its normal operating state.
Steps to start the UPS using only battery power.
Instructions on how to properly shut down the UPS unit.
Describes the UPS operation when powered by utility and providing filtered protection.
Explains UPS operation when utility power is lost and battery power is used.
Details UPS operation during overload, internal failure, or overtemperature.
Describes the UPS state when turned off but connected to AC source.
How to manually switch the UPS between different operating modes.
How to configure the UPS for high-efficiency operation.
Options for customizing bypass operation behavior.
Configuration options related to battery management and warnings.
Instructions to access and view the UPS event log.
Instructions to access and view the UPS fault log.
Guidelines for maintaining the UPS equipment and environment.
Recommendations for storing the UPS for extended periods.
Detailed instructions and safety precautions for replacing UPS batteries.
How to reset battery settings after replacement.
Procedures for replacing Extended Battery Modules (EBMs).
Steps to bring the UPS back to normal operation after battery replacement.
Detailed technical specifications for the Eaton 9PX UPS models.
Details common alarms and faults, their possible causes, and recommended actions.
Instructions on how to silence audible alarms on the UPS.
Information on how to contact Eaton for technical support and service.
Contact information for compliance and regulatory matters related to the UPS.
To Next Page
