Eaton ATC-300 - Page 22

For more information visit: www.eaton.com IB01602008E
Instructional Booklet
Page 22 Effective: March 2014
ATC-300 Breaker Based Transfer Switch
Figure 19A. 4 Pole Neutral Bond for Service Entrance
Step 1: Disconnect the power panel from the rest of the transfer
switch by unplugging the connector plugs P1, P2, and P3
(Figures 20 and 21).
NEUTRAL
ASSEMBLY
GROUND
CONNECTION
NEUTRAL BOND
(FOR SERVICE
ENTRANCE)
NEUTRAL TO
NEUTRAL
ASSEMBLY
JUMPER