Eaton BiWire Flexi - Option Board for FRE, FPE, and Zonal Relays

About the Log Book
11
7. About the Log Book
All information contained within the tables below are fi ctional
for example purposes only.
7.1 Fire System Summary
These sections of the log book must be completed by
the Competent Person who installed the system. It is the
responsibility of the Premises Management to ensure that
this information is fi lled in at the fi re alarm handover.
ZONE INFORMATION DEVICE QUANTITIES
Zone Zone Zone Mode MCP Smoke Heat
Sounders* VADs* I/O*
No. Description (BiWire/Conv) Detectors Detectors
1 Reception BiWire 2 1 0 2 2 0
2 Offi ce 1 BiWire 1 0 2 0 2 0
3 Offi ce 2 Conv 3 0 2 0 2 1
4 Kitchen Conv 2 0 1 0 2 0
5
6
7
8
A brief description
of where the zone
is on the site and/
or what rooms are
in the zone
This defines the
mode confi guration
of the zone which
dictates the type
of devices that can
be fi tted
Quantities of each device type
will be entered here per zone.
Wall and Base Sounders/VADs
may be separated on the log
book
*Only applicable to BiWire Zones
CONVENTIONAL SOUNDER INFORMATION
(Only applicable if conventional zones are configured)
DEVICE QUANTITIES
Circuit Description Sounders VADs I/O
No.
1 Zone 1 & Zone 2 2 2 0
2 Zone 3 & Zone 4 0 2 0
3 0 0 0
4 0 0 0
A brief description of
where the sounder
circuits cover on the
site
Quantities of each conventional device
type will be entered here per circuit. Wall
and Base Sounders/VADs may be added
separated on the log book.
March 2016 www.eaton.com
EATON BiWire Flexi User Manual (PR215-216-519-03 15-03-16, PINSTFLEXIUSER)