Need help?Do you have a question about the Eaton FX6000 and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | FX6000 |
| Category | Control Panel |
| Language | English |
Steps and timeline for project planning and installation.
Standards and best practices for system installation.
Maximum permitted loop length and considerations.
Address capacity per loop and design recommendations.
Description and types of compatible call points.
Range of sounders and beacons compatible with the panel.
Overview of interfaces for system integration.
Description of the touch screen and LED indicators.
Technology simplifying installation and addressing.
Integrated power supply and battery for panel operation.
Mains power supply specifications and approvals.
Specifications for panel batteries, including capacity and fuse.
Specifications for sounder circuits and fire protection outputs.
Physical dimensions, weight, and materials.
General guidelines and precautions for panel installation.
Information on mounting the panel backbox securely.
Routine checks for panel status indicators and faults.
Testing system indicators and device communication.
Instructions for fitting the main panel door.
Procedure for fitting an optional hinged cover.
Overview of walk test mode for system testing.
System configuration options like DB level check.
Programming device inputs for fire, fault, silence, etc.
Setting delay duration for cascade input actions.
Explanation of various system LEDs and their functions.
Description of the multi-function touch screen display.
Navigating the panel interface and screens.
Diagrams for system wiring configurations.
Wiring details for detector bases.
Wiring details for call points.
Wiring details for loop powered beacons.
Wiring details for wall sounders.
Wiring for 3-way input/output units.
Wiring for 1-channel mains rated I/O units.
Wiring for zone monitor units.
Wiring for spur isolators.
Wiring for 4-20mA interfaces.
To Next Page
