Eaton FX6000 - Disabled Devices; Enable;Disable (Others Menu)

74 FX6000 INSTALLATION AND OPERATION MANUAL 25-14683-C December 2019 www.eaton.com
Panel controls & indicators
View Fires
AC = 0
View Pre
Alarms
View
Disabled
View
Faults
Evacuate
Silence
Alarms
Reset
Supervisor
FRE Off
Mute
Buzzer
Others
Addresses: 0
Touch button to
View list
I/O
Zone: 0
Evacuate
Silence
Alarms
Mute
Buzzer
Reset
Supervisor
FRE Off
View Fires
Enable/Disable
Lamp Test
Print
View Pre
Alarms
View
Disabled
View
Faults
Others
AC=100
Weekly Test
Send analogue values to PC
View Log
Send Log to PC
Check Config.
Disabled devices
Enter the Supervisor mode and Select the “Disabled” tab.
The individual buttons show which devices and the number of devices which have
been disabled. Press
one of the buttons to display detailed information for
a particular category
Enable/disable (Others menu)
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and
enter the passcode.
Enter the Supervisor Mode passcode and select the “Others” tab.