Need help?Do you have a question about the Eaton BiWire Flexi and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | BiWire Flexi |
| Category | Control Panel |
| Language | English |
This manual guides the installation and commissioning of the BiWire Flexi 2/4/8 Zone Control panel.
Details the BiWire Flexi Fire Panel's design as an Analogue non-addressable system, its enclosure, and dimensions.
Explains the PSE's role in operating the BiWire Flexi Panel, its connection to mains and batteries, and fault indications.
Describes the EOLM-3 for BiWire zones and EOLM-1 for Conventional zones, including EOLR for IS zones.
Illustrates how to wire different device types into mixed BiWire and Conventional systems.
Explains the visual and audible indicators on the front panel and their meanings.
Details the panel's wiring for mixed BiWire and Conventional installations, covering outputs and inputs.
Describes the functionality and connections for Fire, Fault, and Interlink relays.
Details the option board for FRE, FPE outputs, and Zonal Relay contacts.
Provides essential preparatory notes, warnings, and cautions before starting the installation.
Guides on routing fire-rated cabling and installing devices according to zone maps and system design.
Details the process of mounting the panel, including removing covers, PCB shelf, and PSE.
Instructions for safely connecting the mains supply and battery to the panel's PSE.
Details battery connection procedures and how to connect zone cables, emphasizing polarity and EOLM usage.
Guides on connecting I/O cables, interlinking panels, and setting up repeater connections.
Covers connecting FRE/FPE outputs and Zonal outputs to the option board.
Explains how to configure panel silence modes and zone operating modes (BiWire, Conventional, Intrinsically Safe).
Instructions for fitting detector heads and performing initial power-up checks.
Guides on testing zone fire detection, including detector removal and fault conditions.
Details testing of battery faults, fire outputs, and interlinked panel functions.
Covers system commissioning according to BS5839 and required documentation.
Outlines documents to be handed over and training for premises management.
Outlines the maintenance testing requirements for daily, weekly, quarterly, and yearly intervals.
Explains the multi-function buttons and basic operations like silencing alarms, sounding alarms, and resetting the system.
Details how to mute the panel buzzer and enable/disable zones, fire alarm devices, FRE, or FPE.
Guides on performing individual zone tests and the lamp test for all panel indicators.
Explains how to perform self-test mode and walk test mode for system verification.
Provides detailed technical specifications for the panel's power, zone circuits, sounder outputs, and relays.
Details technical specifications for the Power Supply Equipment (PSE) and End of Line Modules (EOLM-3, EOLM-1).
Lists technical specifications for the option board and recommended cable types.
Provides a table to calculate the normal operating current load for each zone.
Details how to calculate zone loading during an alarm condition, including VADs and sounders.
Provides the formula and fields to calculate the system's battery standby time.
Provides contact information for Eaton Industries and compliance details for EN54-2 and EN54-4.
To Next Page
