63FX6000 INSTALLATION AND OPERATION MANUAL 25-14683-C December 2019 www.eaton.com
PC commissioning software
Non-Latching
Non-latch is a feature where the panel goes back into quiescent state when the Fire
situation is cleared.
Day / Night
Devices affected:
•
Optical-Heat – mode changes between heat or opto-heat mode.
•
Heat – mode changes between Heat A1R and Head CS.
Cascading Delay
Set a delay duration when the cascade input action is selected.
Allocate Zones/Devices
User can define between zones or addresses to be isolated on activation of the
device. The isolate list button enables the user to enter upto 8 unique zones or
addresses.
To Next Page
Loading...
