37FX6000 INSTALLATION AND OPERATION MANUAL 25-14683-C December 2019 www.eaton.com
Technical specification
Deep discharge protection 20.6 Volts
Battery internal
impedance Fault
>0.5 ohms
Inputs
Addressable loops
Max number 1 - 4
Max loop load per loop 220 ma (recommended)*
Max number of addressable devices per loop 200
Class change Operated by external volt free contact
*Max value is 350 ma, but loop loading should be confirmed via Loop Calculator software depending
on the type of hardware being used.
Outputs
Conventional sounder circuits
Number of sounder circuits 4
Total sounder Load 1.5 Amps
Sounder circuit fuses (F1/2/3/4) 1.6 Amp (Quick Blow)
End of line resistor 6k8
Fire protecting equipment
Max Load 60 ma
Fused (PTC3) 100mA polyswitch
End of Line resistor 6k8
Fault routing equipment
Max Load 30 ma
Fused (PTC1) 100mA polyswitch
End of Line resistor 6k8
To Next Page
Loading...
