Eaton BiWire Flexi - Page 14

About the Log Book
14
This table should be fi lled in by the Competent Person when
they visit the site to perform maintenance on the system.
This should include service visits as well as visits to correct
faults or false fi res on the system.
MAINTENANCE WORK
Date Time Zone/Location Reason for Work Carried Additional Work Signed
Work Out Required
06/09/14 08:00 Zone 1 / Reception Fault shown on Faulty detector None Mr C. Person
Zone 1 replaced
07/09/14 08:00 Zone 3 / Kitchen Unwanted Fire Detector type None Mr C. Person
on Zone 3 changed for Smoke
This table should be fi lled in by the Premises Management
when the event occurs and further detail added by the
Competent Person at a maintenance visit (if required)
UNWANTED (FALSE) FIRES
Date Time Zone/ Cause if Maintenance Maintenance Category Further Signed
Location Known Visit Needed Findings Further Action
(YES/NO) Alarm Required
07/09/14 07:00 Zone 3 / Unknown YES Incorrect None Mr P.
Reception detector type Manager
fi tted
This table should be fi lled in by the Premises Management
when a fault occurs; there is a disablement, enablement, a
genuine fi re condition, and weekly tests.
ALL OTHER EVENTS (EXCLUDING MAINTENANCE AND FALSE FIRES)
Date Time Zone/Location Details of Action Required Date Initials
Event Out Completed
05/09/14 08:00 Zone 1 / Weekly test, None, sounders 05/09/2014 PM
Reception call point activation activated.
06/09/14 07:00 Zone 1 / Zone 1 fault Service visit 06/09/2014 PM
Reception indication required
March 2016 www.eaton.com
EATON BiWire Flexi User Manual (PR215-216-519-03 15-03-16, PINSTFLEXIUSER)