Eaton C441R - Page 29

29
User Manual MN04200002E
Effective January 2016
C441 Ethernet module user manual
(C441R, C441T, C441U, C441V)
EATON www.eaton.com
Table 47. S611 Identity Object Instance Attributes (Cont.)
Attrib NV Access
Data
Type Name Description
5 V Get WORD Device
Status
This attribute represents the current
status of the entire devices. Its
value changes as the state of the
device changes.
Bit = Definition
0 = Owned. True indicates the
device has an owner.
2 = Configured. True indicates
the application of the device has
been configured to do something
different than out of box default.
Does not include communication
configuration.
4-7 = Extended Device Status.
8 = Minor Recoverable Fault. True
indicates the device detected
a problem with itself, which is
thought to be recoverable.
9 = Minor Unrecoverable Fault.
True indicates the device detected
a problem with itself, which is
thought to be unrecoverable.
10 = Major Recoverable Fault.
True indicates the device detected
a problem with itself causing a
“Major Recoverable Fault” state.
11 = Major Unrecoverable Fault.
True indicates the device detected
a problem with itself causing a
“Major Unrecoverable Fault” state.
6 NV Set/Get UDINT Serial
Number
32 bit Com Adapter Device Serial
Number.
7 V Get SHORT_
STRING
Product
Name
ASCII Product Name.
8 V Get USINT Device
State
Present State of the Device.
Value = Definition
0 = Nonexistent
1 = Device Self Testing
2 = Standby
3 = Operational
4 = Major Recoverable Fault
5 = Major Unrecoverable Fault
255 = Default for Get Attributes All.
176 NV Set/Get SHORT_
STRING
Assigned
Name
User Defined ASCII Name.
177 V Get UINT C441
DSP FW
Version
C441 DSP Firmware Version
178 V Get UINT UI
Firmware
Version
User Interface Firmware Version
179 NV Set/Get UINT C441
Unit ID
Unit ID
0x00BA (186) - C441BA
0x00BB (187) - C441BB
0x00CA (202) - C441CA
0x00CB (203) - C441CB
0x00DA (218) - C441DA
0x00DB (219) - C441DB
0x00EA (234) - C4410109(x)
0x00EB (235) - C4410590(x)
Class 4 (0x04): Assembly Object
Instance Count: 10
Instance List: 3, 60, 100, 105, 106, 107, 108, 121, 131, 133
Table 48. S611 Assembly Instance Attributes
Attrib NV Access
Data
Type Name Description
3 V Set/Get Array of
BYTE
Data Assembly Data. See sections
below for instance definition.
Table 49. S611 Assembly Instance List:
Type Instance Usage Name
Output 3 Poll Basic Softstarter
Input 60 Poll Basic Softstarter Input
Input 100 Poll Status and Current
Output 105 Poll Basic Overload w/Relay
Output 106 Poll Extended Motor Ctrl
Input 107 Poll Extended Overload w/ IO
Input 108 Poll Motor Ctrl Status w/IO
Input 121 Poll Status Measurement and Thermal
Input 131 Poll Status and Enhanced Measurement
Input 133 Poll Full S611 Monitoring
Assembly Instance Definitions:
Table 50. S611 Assembly Instance 3 (0x03): Basic Softstarter
Byte
Offset
Word
Offset
Size
(bytes) Name Description
0 0 1 Basic
Softstarter
Basic Softstart Assembly.
Bit 0 = Run 1
Bit 2 = Fault Reset
Total Assembly Size (bytes): 1
Table 51. S611 Assembly Instance 60 (0x3C): Basic Softstarter
Input
Byte
Offset
Word
Offset
Size
(bytes) Name Description
0 0 1 Basic
Softstarter
Input
Basic Softstart.
Bit 0 = Faulted
Bit 2 = Running1
Bit 7 = Bypass (at Reference)
Total Assembly Size (bytes): 1
Table 52. S611 Assembly Instance 100 (0x64): Status and Current
Assembly includes the status overview and motor current levels.
Word Size (bytes): 2
All data is little endian (low byte first).
Byte
Offset
Word
Offset
Size
(bytes) Name Description
0 0 2 Device Status Device Bit Array, Bit:
0: Fault
1: Bypass
2: Running1
3: S611 Run/Aux Relay (Relay 1)
4: S611 Fault Relay (Relay 2)
5: CtrlFromNet
6: Permissive
7: Reserved
8: Output #1
9: Output #2
10: Input #1
11: Input #2
12: Input #3
13: Input #4
14: DeviceNet Low Power
15: S611 Intercom Lost
2 1 2 Phase A RMS
Current
Scaled RMS current of phase A. (Amps)
4 2 2 Phase B RMS
Current
Scaled RMS current of phase B. (Amps)
6 3 2 Phase C RMS
Current
Scaled RMS current of phase C. (Amps)
Total Assembly Size (bytes): 8