Eaton Durant Eclipse Series Assembly, Installation And Operation

13
PROGRAMMING cont.
2. Press to select which digit to change (flash), then use or to
change the value of the flashing digit.
Durant
®
3. After all digits have been edited, press
PGM
to go back to the parameter
name.
Durant
®
The Parameter List
The following list shows all programming parameter names, the default value for
each, and the selection range for each. A programmed unit may be restored to de-
fault settings by pressing both the program (
PGM
) and right arrow ( ) keys for
one second. The display will show dFL while the keys are pressed and blink off
momentarily when the default is done.
Parameter Default Description/
Name Value Range
Display rate or display process time.
Rate
Process time

Eaton Durant Eclipse Series Specifications

General

Brand	Eaton
Model	Durant Eclipse Series
Category	Measuring Instruments
Language	English