2.4 Communication Ports
Connection of RS232 or USB communication port (optional)
The RS232 and USB communication ports cannot operate simultaneously.
Tower model
RT model
86-86700-00EN A02 - Page 13
1. Connect the RS232 (33) or USB (34) commu-
nication cable to the serial or USB port on the
computer equipment.
2. Connect the other end of the communication
cable (33) or (34) to the USB (1) or RS232 (2)
communication port on the UPS.
The UPS can now communicate with EATON
power management software.
2. Installation
To Next Page
Loading...
