Eaton MP3010 - Page 24

IM02602002E
Page 4-12
www.eaton.com
MP-3000

SUB-
MENU
LINE # DISPLAY HELP MESSAGE SETTING RANGE/VALUE


VALUE SELECTED
16 RCOM ON
or
RCOM OFF
ENABLE RTD MODULE
COMMUNICATION FAILURE TO
ACTIVATE AUX1 RELAY OUTPUT OR
DISABLE
Toggles between RCOM ON and 
17 IOCT ON
or
IOCT OFF
ENABLE INSTANTANEOUS TRIP TO
ACTIVATE AUX1 RELAY OUTPUT OR
DISABLE
Toggles between IOCT ON and 
18 PH R ON
or
PH R OFF
ENABLE PHASE REVERSAL TRIP TO
ACTIVATE AUX1 RELAY OUTPUT OR
DISABLE
Toggles between PH R ON and
19 INSQ ON
or
INSQ OFF
ENABLE INCOMPLETE SEQUENCE
TRIP TO ACTIVATE AUX1 RELAY
OUTPUT OR DISABLE
Toggles between INSQ ON and 
20 REMT ON
or
REMT OFF
ENABLE REMOTE TRIP TO ACTIVATE
AUX1 RELAY OUTPUT OR DISABLE
Toggles between REMT ON and 
21 DIFT ON
or
DIFT OFF
ENABLE DIFFERENTIAL TRIP TO
ACTIVATE AUX1 RELAY OUTPUT OR
DISABLE
Toggles between DIFT ON and 
22 INCT ON
or
INCT OFF
ENABLE INCOM TRIP TO ACTIVATE
AUX1 RELAY OUTPUT OR DISABLE
Toggles between INCT ON and
23 TRNT ON
or
TRNT OFF
ENABLE TRANSITION TRIP TO
ACTIVATE AUX1 RELAY OUTPUT OR
DISABLE
Toggles between TRNT ON and 
24 ZSWT ON
or
ZSWT OFF
ENABLE ZERO SPEED SWITCH TRIP
TO ACTIVATE AUX1 RELAY OUTPUT
OR DISABLE
Toggles between ZSWT ON and 
25 TBYP ON
or
TBYP OFF
ENABLE TRIP BYPASS TO ACTIVATE
AUX1 RELAY OUTPUT OR DISABLE
Toggles between TBYP ON and 

1 TRN ON
or
TRN OFF
ENABLE TRANSITION OUTPUT IF
ENABLED ALL OTHER FUNCTIONS
FOR AUX 2 ARE DISABLED
Toggles between  and TRN OFF.
If TRN is set to OFF then the following SP AUX2
functions are available and visible.
2 Choose:
GF A ON
GF T ON
or
GF OFF
ENABLE GROUND FAULT ALARM OR
TRIP TO ACTIVATE AUX 2 RELAY
OUTPUT OR DISABLE
Toggles between GF A ON, GF T ON, and

3 Choose:
I2T A ON
I2T T ON
or
V
ENABLE I2T ALARM OR TRIP TO
ACTIVATE AUX2 RELAY OUTPUT OR
DISABLE
Toggles between I2T A ON, I2T T ON, and

4 Choose:
JAM A ON
JAM T ON
or
JAM OFF
ENABLE JAM ALARM OR TRIP TO
ACTIVATE AUX2 RELAY OUTPUT OR
DISABLE
Toggles between JAM A ON, JAM T ON, and

5 Choose:
UL A ON
UL T ON
or
UL OFF
ENABLE UNDERLOAD ALARM OR TRIP
TO ACTIVATE AUX2 RELAY OUTPUT
OR DISABLE
Toggles between UL A ON, UL T ON, and

6 Choose:
UB A ON
UB T ON
or
UB OFF
ENABLE PHASE UNBALANCE ALARM
OR TRIP TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between UB A ON, UB T ON, and

7 Choose:
WD A ON
WD T ON
or
WD OFF
ENABLE WINDING TEMP ALARM OR
TRIP TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between WD A ON, WD T ON, and
