Eaton MP3010 - Page 25

IM02602002E
www.eaton.com Page 4-13
MP-3000

SUB-
MENU
LINE # DISPLAY HELP MESSAGE SETTING RANGE/VALUE


VALUE SELECTED
8 Choose:
MB A ON
MB T ON
or
MB OFF
ENABLE MOTOR BEARING ALARM OR
TRIP TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between MB A ON, MB T ON, and

9 Choose:
LB A ON
LB T ON
or
LB OFF
ENABLE LOAD BEARING ALARM OR
TRIP TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between LB A ON, LB T ON, and

10 Choose:
AX A ON
AX T ON
or
AX OFF
ENABLE AUXILIARY RTD TEMP ALARM
OR TRIP TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between AX A ON, AX T ON, and

11 Choose:
SX A ON
SX T ON
or
SX OFF
ENABLE STARTS PER TIME TRIP OR
ALARM TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between SX A ON, SX T ON, and

12 Choose:
TBS T ON
or
TBS OFF
ENABLE TIME BETWEEN STARTS TRIP
TO ACTIVATE AUX2 RELAY OUTPUT
OR DISABLE
Toggles between TBS T ON and 
13 RTDF ON
or
RTDF OFF
ENABLE INDIVIDUAL RTD CHANNEL
FAILURE TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between RTDF ON and 
14 RCOM ON
or
RCOM OFF
ENABLE RTD MODULE
COMMUNICATION
FAILURE TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between RCOM ON and 
15 IOC A ON
IOC T ON
or
IOC OFF
ENABLE INSTANTANEOUS TRIP TO
ACTIVATE AUX2 RELAY OUTPUT OR
DISABLE
Toggles between IOCT ON and 
16 PH R ON
or
PH R OFF
ENABLE PHASE REVERSAL TRIP TO
ACTIVATE AUX2 RELAY OUTPUT OR
DISABLE
Toggles between PH R ON and 
17 INSQ ON
or
INSQ OFF
ENABLE INCOMPLETE SEQUENCE
TRIP TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between INSQ ON and 
18 REMT ON
or
REMT OFF
ENABLE REMOTE TRIP TO ACTIVATE
AUX2 RELAY OUTPUT OR DISABLE
Toggles between REMT ON and 
19 DIFT ON
or
DIFT OFF
ENABLE DIFFERENTIAL TRIP TO
ACTIVATE AUX2 RELAY OUTPUT OR
DISABLE
Toggles between DIFT ON and 
20 INCT ON
or
INCT OFF
ENABLE INCOM TRIP TO ACTIVATE
AUX2 RELAY OUTPUT OR DISABLE
Toggles between INCT ON and 
21 TRNT ON
or
TRNT OFF
ENABLE TRANSITION TRIP TO
ACTIVATE AUX2 RELAY OUTPUT OR
DISABLE
Toggles between TRNT ON and 
22 ZSWT ON
or
ZSWT OFF
ENABLE ZERO SPEED SWITCH TRIP TO
ACTIVATE AUX2 RELAY OUTPUT OR
DISABLE
Toggles between ZSWT ON and 
23 TBYP ON
or
TBYP OFF
ENABLE TRIP BYPASS TO ACTIVATE
AUX2 RELAY OUTPUT OR DISABLE
Toggles between TBYP ON and 

1 MAX 100 4-20 MA OUTPUT
Select one of MAX 100, , MAX
WRTD or MAX %I2T
MAX 125 MAX 100-20 MA FOR 100% FLA
MAX WRTD MAX 125-20 MA FOR 125% FLA
MAX %I2T MAX WRTD - 20 MA FOR TRIP LEVEL
MAX %I2T-20MA FOR 100% I2T