UPS SETUP
Eaton 9355 UPS (10/15 kVA) User's Guide S 164201594 Rev D www.eaton.com/powerquality
14
NOTE Support the front and back of the cabinet when rolling it off the pallet to prevent
tipping.
7. Slowly roll the cabinet toward the rear of the pallet. Once the pallet
tilts, continue rolling the cabinet down the pallet until the cabinet
touches the floor (see Figure 4).
If needed, adjust the leveling feet so that the cabinet rolls freely.
Figure 4. Unloading the Cabinet
8. With the cabinet supported, slowly pull the pallet away from the
cabinet (see Figure 5).
Figure 5. Removing the Pallet
9. Roll the cabinet to the desired location.
10. Continue to “Selecting an Installation Option” on page 18.
To Next Page
Loading...
