Eaton PowerXL DM1-113D0NB-S20S - Table 19. Stripping Lengths; Table 20. Connection Sizes and Torques‚&#X83

33
Chapter 5—Electrical installation
POWERXL SERIES VFDS MN040060EN—September 2020 www.eaton.com
Table 19. Stripping lengths.
Frame size Power wiring Motor wiring
A1
in. (mm)
B1
in. (mm)
C1
in. (mm)
D1
in. (mm).
A2
in. (mm)
B2
in. (mm)
C2
in. (mm)
D2
in. (mm)
FR1 0.39 (10) 2.76 (70) 0.39 (10) 2.76 (70) 0.39 (10) 2.76 (70) 0.39 (10) 2.76 (70)
FR2 0.47 (12) 2.76 (70) 0.47 (12) 2.76 (70) 0.47 (12) 2.76 (70) 0.47 (12) 2.76 (70)
FR3 0.47 (12) 3.54 (90) 0.47 (12) 3.54 (90) 0.47 (12) 3.54 (90) 0.47 (12) 3.54 (90)
FR4 0.79 (20) 4.53 (115) 0.79 (20) 4.53 (115) 0.79 (20) 4.53 (115) 0.79 (20) 4.53 (115)
Note: For I/O/STO/relay output wires, the stripping lengths = 0.236 in. (6-7 mm)
Table 20. Connection sizes and torques.
Output rating Size and torque
Input voltage
Frame
size
Drive
catalog
number
CT/I
H
current
amps
VT/I
L
current
amps
Power
wire size
AWG
(mm
2
)
Power wire
torque
in.-lb (N·m)
Ground
wire size
AWG
(mm
2
)
Ground
wire
torque
in.-lb (N·m)
Control
wire size
AWG (mm
2
)
Control
wire torque
in.-lb (N·m)
AI/DI RO
100 Vac to
120 Vac
50/60 Hz
1-phase
FR1 DM1-111D6… 1.6 2.5 14 (2.5) 4.4 (0.5) 10 (2.5) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
DM1-113D0… 3 4.8 10 (6) 4.4 (0.5) 8 (6) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
FR2 DM1-114D8… 4.8 6.9 8 (10) 10.5 (1.2) 8 (10) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
DM1-116D9… 6.9 7.8 8 (10) 10.5 (1.2) 6 (10) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
200 Vac to
240 Vac
50/60 Hz
1-phase"
FR1 DM1-121D6… 1.6 2.5 14 (2.5) 4.4 (0.5) 14 (2.5) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
DM1-123D0… 3 4.8 14 (2.5) 4.4 (0.5) 10 (2.5) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
DM1-124D8… 4.8 7.8 10 (6) 4.4 (0.5) 8 (6) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
FR2 DM1-127D8… 7.8 11 10 (6) 10.5 (1.2) 8 (6) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
DM1-12011… 11 17.5 8 (10) 10.5 (1.2) 6 (10) 7.1 (0.8) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)
FR3 DM1-12 017… 17.5 25.3 6 (16) 10.5 (1.2) 6 (16) 14.2 (1.6) 28-16 (0.5-1.5) AI/DI:
1.73(0.2);
RO: 4.5 (0.5)
4.5 (0.5)