1
Chapter 1 - PowerXL DM1 series overview
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Chapter 1 - PowerXL DM1 series overview
This chapter describes the purpose and contents of this
manual, the receiving inspection recommendations and the
PowerXL Series Open Drive catalog numbering system.
How to use this manual
The purpose of this manual is to provide you with
information necessary to install, set and customize
parameters, start up, troubleshoot, and maintain the Eaton
PowerXL Series variable frequency drive (VFD). To provide
for safe installation and operation of the equipment, read
the safety guidelines at the beginning of this manual and
follow the procedures outlined in the following chapters
before connecting power to the PowerXL Series VFD. Keep
this operating manual handy and distribute to all users,
technicians and maintenance personnel for reference.
Table 1. Common abbreviations.
Abbreviation Definition
CT Constant torque with high overload rating (150%)
VT Variable torque with low overload rating (110%)
IH High overload current (150%)
I
L
Low overload current (110%)
VFD Variable frequency drive
RTC Real time clock
Rating label
Figure 1. Rating label.
Cat. No.: DM1-321D6EB-S20S-EM
Style No.: 3-5001-005A
PowerXL
TM
DM1 VFD Factory ID：T
CT/VT
Input
Output
0.25HP/
0.5HP
(0.18KW/
0.37KW)
U(V~)
208-240 3Ø 0~Vin 3Ø
F(Hz) 50/60 Hz
0-400 Hz
I (A) 2.1/3.3 1.6/2.5
User installation manual:MN040060EN
Serial No.: XXXXXXXXXX
NAED: 786689351328
Field installed conductors must be copper rated at 75°C
YYMMDD Assembled in Dominican Republic
IP20 / UL Open Type
IP20 / NEMA 1 / UL Type 1
with NEMA 1 kit installed
Enclosure Rating
Contains FCC ID: 2ADXE-HY-40R204PC
EAN: 4015081980796
90/100 loss
Details
IE Class IE2
2.8%
http://eaton.com/EcoDesign-VFD
Contains IC: 23267-HY40R204PC
To Next Page
Loading...
