Eaton PowerXL DM1 Series - Page 246

236
Chapter 7- Multi-purpose application
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Table 71. System (Cont.).
P13.3 - User display.
P13.3.1
b
Output display unit
ID 2424
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
45
Options:
0 = %;
1 = 1/min;
2 = rpm;
3 = ppm;
4 = pps;
5 = l/s;
6 = l/min;
7 = l/h;
8 = kg/s;
9 = kg/min;
10 = kg/h;
11 = m3/s;
12 = m3/min;
13 = m3/h;
14 = m/s;
15 = mbar;
16 = bar;
17 = Pa;
18 = kPa;
19 = mVS;
20 = kW;
21 = Deg. C;
22 = GPM;
23 = gal/s;
24 = gal/min;
25 = gal/h;
26 = lb/s;
27 = lb/min;
28 = lb/h;
29 = CFM;
30 = ft3/s;
31 = ft3/min;
32 = ft3/h;
33 = ft/s;
34 = in wg;
35 = ft wg;
36 = PSI;
37 = lb/in2;
38 = HP;
39 = Deg. F;
40 = PA;
41 = WC;
42 = HG;
43 = ft;
44 = m;
45 = Hz;
46 = strokes/min.
Description:
Allows for changing the M1.1 and M1.2 value to a desired unit that will reflect the application. From there with P13.3.2 and P13.3.3, it
will allow setting a minimum/maximum limit for the value to display desired output.
P13.3.2
b
Output display unit minimum
ID 2460
Minimum value:
-60,000.00 varies
Maximum value:
OutputDisplayUnitMax
varies
Default value:
0.00 varies
Description:
Sets the minimum scaled value when changing the display unit to a value other than the default Hz.
P13.3.3
b
Output display unit maximum
ID 2425
Minimum value:
OutputDisplayUnitMin
varies
Maximum value:
60,000.00 varies
Default value:
MotorNomFreqMFG
varies
Description:
Sets the maximum scaled value when changing the display unit to a value other than the default Hz.