Eaton PowerXL DM1 Series - Page 248

238
Chapter 7- Multi-purpose application
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Table 71. System (Cont.).
P13.6.4
Total motor hour count
ID 1872
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
h
Description:
Number of hours the DM1 PRO has been running a motor.
P13.6.5
Trip MWh count
ID 604
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
MWh
Description:
Megawatts hours of the drive output active since last reset.
P13.6.6
TClear trip MWh count
ID 639
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
0
Options:
0 = Not reset;
1 = Clear trip MWh count; or
2 = Clear trip power count.
Description:
Resets the day and hour motor or drive running counter and resets the motor run time in the menu.
P13.6.7
Trip power day count
ID 636
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Number of days since the last reset.
P13.6.8
Trip power hour count
ID 637
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Number of hours the DM1 PRO has been running a motor since the last reset.
a
Parameter value can only be changed after the drive has stopped.
b
Parameter value will be set to be default when changing macros.