15
Chapter 3 - Startup
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Table 5. Start-up wizard instructions (Cont.).
P11.6 .1
Blue tooth enabled
ID 1895
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Disabled; or
1 = Enable.
Description:
Blue tooth enable.
a
Parameter value can only be changed after the drive has stopped.
b
Parameter value will be set to be default when changing macros.
Now the Start-up Wizard is done. It will not show again at the next power up. If you want to reset it, please select it from
the main menu (“Start-up Wizard”).
The PID Mini-Wizard is activated in the Quick Setup menu
To Next Page
Loading...
