Eaton Corporation Page 15 Ver 1.1
5.3 Identify the Eaton Grid-Tied PV Inverter
The structure of the Eaton grid-tied PV Inverter can be divided into two parts,
main housing and wiring box shown in figure 5.3.1. The main housing
contains the electrical components that are used for power conversion and
the wiring box contains the electrical components that are used as the
connection points for DC input voltage and AC output voltage as required by
the NEC.
Eaton grid-tied PV Inverter can be identified by the name plate. The name
plate indicates general electrical information of the product as below figure
shown:
Figure 5.3.2: Main Housing Name Plate
Main Housing
Wiring Box
Figure 5.3.1: PV Inverters Structure
To Next Page
Loading...
