Eaton TRIPP LITE Series - 2.5 Wall Mount Installation

Eaton Tripp Lite Series Cloud Connected UPS Systems User Guide 934859—Rev B 7
22..55 WWaallll MMoouunntt IInnssttaallllaattiioonn
The Tripp Lite Series UPS system includes four M4 x 20 mm Phillips self-tapping screws that should be
installed directly into the center of a wood wall stud for mounting the UPS in a vertical or horizontal orientation.
Use appropriate anchoring methods for other wall material types to ensure the UPS is securely mounted and
supported.
NOTE The arrows on the bottom label of the UPS indicate the correct orientation to observe
when installing the unit. See Figure 6.
Vertical wall mount
M4x20 Phillips self-tapping screws
Horizontal wall mount
M4x20 Phillips self-tapping screws
Wall Mount Installation