Eaton VCP-W Series - Table 14. Simple Electrically Operated Ground and Test Device for VCP-W Without Key Interlocks; Table 15. Simple Electrically Operated Ground and Test Device for VCP-WXC; Table 16. 27 Kv Manual Ground and Test Device

20
Instruction Booklet IB131006EN
Effective March 2019
Instructions for installation,
operation, and maintenance of type
VCP-W vacuum circuit breakers
EATON www.eaton.com
Table 14. Simple electrically operated ground and test device for VCP-W without key interlocks.
Description Style number
Electrically operated ground and test device
Lower terminal
1200/2000 A, 125 Vdc or 120 Vac, 50 kA with ROF 66A5312G45
Note: These units are also available as direct-roll-on-the-floor products via a separately purchased wheel kit.
Table 15. Simple electrically operated ground and test device for VCP-WXC.
Description Style number
Electrically operated ground and test device
Upper terminal
1200/2000/3000 A, 125 Vdc or 120 Vac, 63 kA 66A5302G83
Lower terminal
1200/2000/3000 A, 125 Vdc or 120 Vac, 63 kA 66A5302G93
Note: These units are also available as direct-roll-on-the-floor products via a separately purchased wheel kit.
Table 16. 27 kV manual ground and test device.
Description Style number
27 kV simple manual ground and
test device—bus bar type
1200/2000 A, bus bar type—top and bottom studs 1C94354G01
1200/2000 A, bus bar type—top and bottom studs with factory
installed wheel kit
1C94 354G11
1200/2000 A, ball type—top and bottom studs 66A5296G01
1200/2000 A, ball type—top and bottom studs with factory installed
wheel kit
66A5296G11
Ball connector
Ball type