Eaton Vickers DG3V-8 Series User Manual

3
Section I. - Introduction
A. Purpose of Manual
This manual describes operational characteristics,
maintenance requirements, and overhaul information for
Vickers DG3V-8 and DG5V-8 series single stage and two
stage pilot operated and hydraulic operated directional
valves. The information contained herein pertains to the
latest design series as listed in Table 1.
B. Related Publications
Service parts and installation dimensions are not contained in
this manual. The parts and installation drawings listed in Table
1 are available from any Vickers sales engineering office
C. Model Codes
Variations within each basic model series are covered in the
model code. See Table 2. Each unit has a model code
marked on the main stage nameplate. Service inquiries
should always include the complete model number as noted
on the nameplate.
Model
Descrip-
tion
Application
Drawing
Parts
Drawing
DG3V-8*A
DG3V-8*C
5007.03/EN/0496/S
DG3V-8*D
DG5V-8*A
DG5V-8*B
5007.02/EN/0196/A
DG5V-8*C
5007 04/EN/0496/
S
DG5V-8*D
5
00
7.
04/EN/0496/
S
DG5V-8*F
DG5V-8*N
Table 1. Related Publications

Eaton Vickers DG3V-8 Series Specifications

General

Brand	Eaton
Model	Vickers DG3V-8 Series
Category	Control Unit
Language	English