Finally, you can see the default gateway address, as shown in the image below.
Now we know the default gateway address we only need to know the username and password of your
router. Some routers have a sticker on the bottom with the factory username and password, other ones
don`t have a password, and the password can also be set by the user or mechanic. There is a very handy
website with allot of router brand information like default IP address, default username and password etc.
Please note we only refer to this website, we do not maintain or support it. The website is:
http://portforward.com/
Click “Router List” and find your brand and type to find more handy details about
your router if you can’t find them anywhere else. For more information on portforward.com, please go to
step 3.4.
We know have all information to get the DDNS working, we will show you how to do this.
1. Open your web browser and type in the default gateway address and press enter.
2. Enter the username and password from the router
To Next Page
Loading...
