Click to stop the live video. You can click play icon if you want to see live video again.
Click to get snapshot. It will show the date and time of the snapshot you get, if you save it,
you will find the snapshot file named by “snapshot_MAC ID_date_time”.
Click to start record manually, and the icon will change to red color, click it again, it will
stop recording. The record file will be saved to the folder you set. (Figure 10.8 - Figure 11.0).
Click to collect the sound from the camera, you will hear the sound from the camera
through the speaker in the computer which you are using. Your IP Camera has a built-in microphone, when
you click it to start work, the icon will change to red color, click it again, will stop the audio function.
Click to start the talk function, (you’ll need to plug a microphone into your computer if it
doesn’t have one built-in). When you talk into the microphone in your computer, the sound will come out
from the built-in speaker in the camera, people beside the camera will hear the sound. If you connect an
external speaker to the audio output jack on the back of the camera (Figure 1.2), you will get better sound.
Click it once to start, the icon will change to red color, click it again to stop talk function.
NOTE: For visitor, if you click other menus which visitors don’t have the right to operate, there will be a pop-up
for the login interface (Figure 2.6), please input the user name / password for at least 3 times to login again.
2.8 For Operator
When you login as Operator, you can enter the IP Camera for Operator.
For operator, it not only supports all the functions for Visitor, but also supports these functions below:
To Next Page
Loading...
