Need help?Do you have a question about the Ebode IPV38 and is the answer not in the manual?
Explains how to use the IP Camera Tool software for camera discovery and basic management.
Guides users on how to access the camera interface via different browsers and modes.
Details the process of accessing the camera using Internet Explorer with ActiveX.
Instructions for accessing the camera using browsers like Safari, Firefox, and Chrome.
Specific instructions for using the ActiveX mode in Internet Explorer for camera control.
Guides on configuring the camera to support multiple devices and channels simultaneously.
Configuration of IP address, subnet mask, gateway, and DNS for network connectivity.
Steps to connect the camera wirelessly to a Wi-Fi network, including scanning and security.
Setup for Dynamic DNS to enable remote access to the camera using a domain name.
Manual configuration of router port forwarding rules for external access.
Setup for sending email alerts with snapshots upon detected motion.
Configuration for uploading images to an FTP server upon motion detection.
Enables motion detection, recording, and alarm sound when movement is detected.
Provides solutions to common problems encountered during setup and operation.
Common reasons and solutions for failing to access the camera remotely over the internet.
General| Night Vision | Yes |
|---|---|
| Lens | 3.6mm |
| Viewing Angle | 90° |
| Power Supply | DC 12V/1A |
| Operating Temperature | -10°C to 50°C |
| Weather Resistance | IP66 |
| Wireless | Wi-Fi IEEE 802.11b/g/n |
| Night Vision Range | 10 meters |
| Network Interface | RJ45 |
| Supported Protocols | TCP/IP, UDP, DHCP, DNS, RTSP |
| Storage | MicroSD card (up to 128GB) |
To Next Page
