To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if my Echo CS-303T engine cranks but no fuel is reaching the cylinder?
If your Echo Chainsaw engine cranks, but no fuel is reaching the cylinder, consult your ECHO dealer about potential carburetor issues.
General| Engine Displacement | 30.1 cc |
|---|---|
| Fuel Capacity | 0.21 US quarts |
| Oil Capacity | 0.16 US quarts |
| Guide Bar Length | 12 inches |
| Power Source | Gas |
| Fuel Tank Capacity | 260 ml |
| Oil Tank Capacity | 0.16 US quarts |
| Weight (without bar and chain) | 3.9 kg |
| Chain Pitch | 3/8 in. |
| Chain Gauge | 0.050 in. |
Locate and record model and serial numbers for service.
Details on warranty service, consumer support, product registration, and obtaining additional literature.
Essential safety rules and precautions for chain saw users.
Instructions on operating and testing the chain brake mechanism.
Details on how the automatic chain brake functions and is tested.
General safety guidelines and warnings for operating the chain saw.
Guidance on the operator's physical and mental state for safe operation.
Covers hand, hearing, breathing protection, and appropriate clothing for safe operation.
Precautions for prolonged use, cold exposure, and vibration effects.
Information on preventing RSI and Carpal Tunnel Syndrome from chain saw use.
Explanation of various international symbols used on the chain saw and in the manual.
Explanation of safety alert symbols (Danger, Warning, Caution, Notice) and their meanings.
Information on emission control systems, labels, and compliance periods.
Identification of safety decals and numbered components on the chain saw.
Definitions of common terms used in chain saw operation and maintenance.
Steps for preparing the chain saw for use, including installing optional accessories.
Procedure for installing and removing the guide bar and saw chain.
Instructions on how to properly tension the saw chain.
Specifications for gasoline and two-stroke oil, including approved types and ratios.
Safety precautions and procedures for mixing, storing, and handling fuel.
Detailed guide on mixing fuel, storage recommendations, and disposal.
Information on selecting and using the correct chain lubricant for optimal performance.
Step-by-step instructions for starting the chain saw when the engine is cold.
Troubleshooting steps for starting a chain saw that is difficult to start.
Procedure for starting the chain saw when the engine is already warm.
Guidelines for operating the chain saw safely and efficiently after starting.
Instructions on how to safely stop the engine and the chain saw.
Procedure for checking and adjusting the chain tension for safe operation.
Method to verify the chain oiler is functioning correctly.
Basic safety and operational advice for cutting with the chain saw.
Explanation of kickback and techniques to prevent it during cutting.
Detailed instructions and safety precautions for felling trees.
Techniques and safety for limbing fallen trees and bucking logs.
Recommended chain and guide bar specifications for optimal performance and safety.
Guidance on maintaining the chain, including low-kickback requirements.
Explanation of skill levels required for different maintenance tasks.
Schedule of recommended maintenance tasks based on usage frequency.
Procedure for adjusting the carburetor for optimal engine performance.
Instructions for breaking in a new engine before making adjustments.
Adjustments needed for carburetor performance at higher altitudes.
Procedure to check the integrity of the lifting hook after impact.
Steps for inspecting, cleaning, and replacing the air filter.
Instructions for checking, cleaning, gapping, and replacing the spark plug.
Procedure for checking the fuel system for leaks and proper function.
Steps for checking, cleaning, and replacing the fuel filter.
Information on the automatic oiler and how to check its discharge volume.
Procedure for checking and cleaning the oil filter/strainer.
Steps for cleaning the guide bar groove, oil holes, and inverting it.
Guidance on inspecting the sprocket for wear and replacement criteria.
Procedure for cleaning the engine cooling fins for optimal performance.
Information on the spark arrestor muffler's function and requirements.
Steps for cleaning and inspecting the spark arrestor screen.
Procedure for cleaning carbon deposits from the cylinder exhaust port.
Instructions for setting and sharpening the saw chain cutters and depth gauges.
Guide to diagnose and resolve common engine starting and running issues.
Troubleshooting table for engine performance issues like stalling or lack of acceleration.
Recommended procedures for storing the chain saw after use to ensure longevity.
Technical data and dimensions for the ECHO CS-303T chain saw.
