CS-352 DESCRIPTION
X7503275704 21
© 09/20 ECHO Incorporated
CHAIN SAW TERMS
1. FAST IDLE - Throttle setting that causes engine to operate at a faster
speed for easier starting.
2. THROTTLE LATCH - Device that sets idle speed to fast idle when
choke control is operated.
3. CHAIN BRAKE - Stops the saw chain.
4. DRIVE SPROCKET - Drives saw chain.
5. CLUTCH - Turns drive sprocket when engine rpm is fast enough to
provide the power needed for cutting.
1. Rear Hand Guard
2. Purge Pump
3. Choke Control Knob
4. Chain Brake Lever/Front Hand Guard
5. Spark Arrestor Muffler Or Spark Arrestor Muffler With Catalyst
6. Saw Chain
7. Guide Bar
8.
Kick Guard
TM
Optional
9. Chain Catcher
10. Chain Tension Adjuster
11. Chain Brake/Sprocket Guard
12. Cylinder Cover
13. Spark Plug
14. Throttle Trigger Lockout
15. Rear Handle - For The Right Hand
16. Throttle Trigger
17. Stop Switch
18. Fuel Tank Cap
19. Cylinder Cover Latch
20. Starter Handle
21. Front Handle - For The Left Hand
22. Oil Tank Cap
To Next Page
Loading...
Need help?
General