Echo CS-352 User Manual

OPERATION CS-352
32 X7503275704
© 09/20 ECHO Incorporated
Starting Warm Engine
Make sure the bar and chain are free from any obstruction when
starting the chain saw.
1. Move chain brake lever fully
FORWARD to LOCK chain brake
before starting.
2. Confirm there is fuel and chain
oil in the tanks.
3. Move ignition switch (A) UP to
“RUN” position.
4. Securely hold the chain saw as
shown and pull starter handle.
5. Choke may be used if necessary,
but after first starting sound,
squeeze throttle trigger to
release choke and return engine
to idle.
Note: If engine does not start
after 5 pulls, use cold start
procedure.
Note: Do not increase engine
speed while chain brake is
locked. Severe brake
damage will result.
Chain brake
A

Echo CS-352 Specifications

General

Brand	Echo
Model	CS-352
Category	Chainsaw
Language	English